Avaya S8500 Quick Start Manual page 14

Installing the Hardware: Dual NIC*
2d
(S8500B)
1) Loosen the captive screw on the rear of the media
server.
2) Slide the media server cover back from the front panel
until the cover's tabs are released from the top slot of
the front panel.
3) Lift the cover straight up and move it away from the
media server.
4) Carefully grasp the new NIC by the top edge or upper
corners and align it with the PCI-2 expansion slot.
Press the NIC firmly into the expansion slot.
1
6
2
5
3
2
5) Position the NIC faceplate so
that it fits in the PCI-2 slot using
the captive screw to hold it in
place.
6) Tighten the captive screw.
7) Replace the cover
4
*Optional
1