Avaya S8500 Quick Start Manual page 16

Hide thumbs Also See for S8500:

Installing the Hardware: Rail Installation to the Media Server

(S8500B)

CAUTION - Be careful when working with the rail-locking carriers on the rails. When released, the rail-locking

carriers can pinch fingers severely.

1. Press the release tab on the front shipping bracket (1) and remove the front shipping bracket from the slide rail

(11). Repeat this step for the rear shipping bracket.

2. Press on the rail-adjustment bracket (3) on the rear of the slide rail to prevent the bracket from moving.

3. Press on tabs (5 and 6) and slide the rail-locking carrier toward the front of the slide rail until it snaps into place.

4. Press on tabs (5 and 6) on the front rail-locking carrier and slide the rail-locking carrier toward the rear of

the slide until it snaps into place.

NOTE - If you need to adjust the slide-rail length, lift the release tab (3) and fully extend the rail-adjustment bracket

from the rear of the slide rail until it snaps into place.

5. Align the pins (7) on the rear rail-locking carrier with the holes on the rear mounting flange.

NOTE - For the next step, be sure that the

pins (7) are fully extended through the

mounting flange (8) and slide rail.

6. Press tab (5) to secure the rear of

the slide rail to the rear mounting

flange. The rail-locking carrier

secures the rail to the desired

position.

7. Align the pins (7) on the front rail-

locking carrier to the front mounting

flange (8). If you adjusted the rail

length, push the rail-locking carrier

back toward the rear of the slide rail to

align the slide rail with the mounting

flange (8).

NOTE - For the next step, be sure that the

pins (7) are fully extended through the

mounting flange (8) and slide rail.

8. Press tab (5) to secure the front of the

slide rail to the front mounting flange (8).

9. Align the media server on the slide

rails and push the media server fully

into the rack cabinet.

10. Secure the media server to the front

mounting flanges with the captive

thumbscrews.

d is