Avaya S8500 Quick Start Manual page 5

REN Number
For MCC1, SCC1, CMC1, G600, and G650 Media Gateways:
This equipment complies with Part 68 of the FCC rules. On either the rear or inside the front cover of this
equipment is a label that contains, among other information, the FCC registration number, and ringer
equivalence number (REN) for this equipment. If requested, this information must be provided to the
telephone company.
For G350 and G700 Media Gateways:
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the
rear of this equipment is a label that contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. The digits represented by ## are the ringer equivalence number (REN) without a
decimal point (for example, 03 is a REN of 0.3). If requested, this number must be provided to the
telephone company.
For all media gateways:
The REN is used to determine the quantity of devices that may be connected to the telephone line.
Excessive RENs on the telephone line may result in devices not ringing in response to an incoming call. In
most, but not all areas, the sum of RENs should not exceed 5.0. To be certain of the number of devices
that may be connected to a line, as determined by the total RENs, contact the local telephone company.
REN is not required for some types of analog or digital facilities.
Means of Connection
Connection of this equipment to the telephone network is shown in the following tables.
For MCC1, SCC1, CMC1, G600, and G650 Media Gateways:
Manufacturer's Port
Identifier
Off premises station
DID trunk
CO trunk
Tie trunk
Basic Rate Interface
1.544 digital interface
120A4 channel service
unit
FIC Code SOC/REN
/
A.S. Code
OL13C 9.0F
02RV2-T 0.0B
02GS2 0.3A
02LS2 0.3A
TL31M 9.0F
02IS5 6.0F, 6.0Y
04DU9-BN 6.0F
04DU9-IKN 6.0F
04DU9-ISN 6.0F
04DU9-DN 6.0Y
Network
Jacks
RJ2GX,
RJ21X,
RJ11C
RJ2GX,
RJ21X
RJ21X
RJ21X
RJ2GX
RJ49C
RJ48C,
RJ48M
RJ48C,
RJ48M
RJ48C,
RJ48M
RJ48C