Connecting A Cable Or Satellite Box; Hdmi (Best) - Insignia NS-32D220NA18 User Manual

Connecting a cable or satellite box

Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see
You can connect a cable or satellite box using:

• HDMI (best)

• AV (good)
• Coaxial (good)
HDMI (best)
On your TV
HDMI cable
connector
HDMI jack
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT jack on
the cable or satellite box.
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
 
6 Press or to highlight HDMI1, HDMI2, or HDMI3, then press ENTER.
Note
Side of TV
HDMI cable
• The 32" model does not have an HDMI3 option.
• An HDMI cable carries both audio and video. You do not need to use any
audio cables.
www.insigniaproducts.com
What connection should I use?
32" Cable or
satellite box
32" 720p/43" 1080p 60Hz LED TV
on page 18.
HDMI cable
Cable wall
jack
43"
Side of TV
19