NS-32D220NA18/NS-43D420NA18
AV (good)
Notes
Cables are often color-coded to match color-coded jacks.
On your TV
AV cable
Audio cable
connector
connectors
AV jack
Analog
audio jacks
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an AV cable (not provided) to the VIDEO jack and L and R AUDIO jacks on the back of your TV and to the
AV OUT jacks on the DVD or Blu-ray player.
Important
When you connect the audio using the L and R AUDIO jacks, the audio
output is analog.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
or
to highlight AV, then press ENTER.
24
DVD or
Blu-ray player
www.insigniaproducts.com
AV cable
Back of TV