Table of Contents
Advertisement
NS-19E320A13_NS-22E340A13_11-1256_MAN_V1_ENG.book Page 9 Thursday, February 9, 2012 3:19 PM
Insignia 19"/22" LED TV
Connecting power
To connect the power:
• Connect the AC power cord on the back of your
TV to a power outlet.
Cautions
•
Your TV should only be operated from the
power source indicated on the label.
•
Always unplug the AC power cord from the
power outlet when you will not be using your
TV for an extended period of time.
Connecting a cable or satellite box
Many cable or satellite TV boxes have more than
one connection type. To get the best video, you
should use the best connection type available. For
more information, see
use?" on page 8.
Using HDMI (best)
To connect a cable or satellite box using HDMI:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
"What connection should I
www.insigniaproducts.com
3 Connect an HDMI cable (not provided) to one of
the HDMI jacks on the side of your TV and to the
HDMI OUT jack on the cable or satellite box.
Cable or satellite box
HDMI cable
4 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
5 Go through the Setup Wizard on page 20.
Note
An HDMI cable carries both audio and video. You do
not need to use any audio cables.
Side of TV
9
Advertisement
Table of Contents
