Connecting A Cable Or Satellite Box; Hdmi® (Best) - Insignia NS-39DR510NA17 User Manual

NS-39DR510NA17_16-0747_MAN_V2_EN.book Page 15 Monday, October 31, 2016 9:06 AM

Connecting a cable or satellite box

Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see
You can connect your cable or satellite box using:
• HDMI® (best)
• AV (composite video) (good)
• Coaxial (good)
HDMI® (best)
On your TV
HDMI® cable
connector
HDMI® jack
1 Make sure that your TV's power cord is unplugged and all connected devices are turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI® cable (not provided) to an HDMI jack on the back or side of your TV and to the HDMI OUT jack
on the cable or satellite box.
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 On the Home screen, press
Cable or
satellite box
HDMI® cable
or
Note
An HDMI® cable carries both audio and video. You do not need to use any
audio cables.
www.insigniaproducts.com
What connection should I use?
Cable
wall jack
to highlight the HDMI 1, HDMI 2, or HDMI 3 tile, then press OK.
39" 1080p, 60Hz, LED Roku TV
on page 14.
Back of TV
15