NS-32D220NA18/NS-43D420NA18
Connecting external speakers or a sound bar
You can connect external speakers or a sound bar to the digital audio jack using:
• Digital audio
• Analog audio
Digital audio
On your TV
Digital optical
audio cable
connector
Digital optical
audio jack
1 Make sure that your TV's power cord is unplugged and the digital speaker system or sound bar is turned off.
2 Connect a digital optical audio cable (not provided) to the DIGITAL OUTPUT (OPTICAL) jack on the side of your TV
and to the optical AUDIO IN jack on the digital speaker system or sound bar.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the digital speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the digital speaker system or sound bar.
5 On your TV's Audio menu, highlight Digital Audio Format / Audio Delay, then press ENTER or
Format option to PCM. See the Digital Audio Format / Audio Delay option in
page 49.
30
Digital speaker system
Digital optical audio
32":
Side of TV
www.insigniaproducts.com
Sound bar
cable
Adjusting sound settings
43":
Side of TV
. Set the Audio
on