Using Inlink; Turning Inlink On Or Off - Insignia NS-32D220NA18 User Manual

Using INlink

INlink lets you control HDMI CEC-compatible devices
connected to the HDMI jacks on your TV using the
remote control that came with your TV.
Note
You can use the media buttons on your
remote control to control playback.
To use INlink, you must set the INlink Control setting
on the INlink menu to On.
Notes
• HDMI cables must be used to connect
HDMI CEC-compatible devices to your TV.
• The connected device's HDMI CEC feature
must be turned on.
• If you connect an HDMI device that is not
HDMI CEC-compatible, none of the
INlink Control features work.
• Depending on the connected HDMI
device, some INlink Control features
may not work.
This section covers:

• Turning INlink on or off

• Turning Device Auto Power Off on or off
• Turning TV Auto Power On on or off
• Turning Audio Receiver on or off
• Displaying a list of INlink-compatible devices
• Selecting an INlink-compatible device
• Opening an INlink-compatible device's root menu
Turning INlink on or off
1 Press MENU.
2 Press
3 Press
4 Press
5 Press
6 Press MENU to return to the previous menu, or
www.insigniaproducts.com
32" 720p/43" 1080p 60Hz LED TV
 
or to highlight SETTINGS, then press
or ENTER.
 
or to highlight INlink, then press ENTER

or .
 or  to highlight INlink Control, then
press ENTER or  .
 
or to highlight On or Off, then press
ENTER.
press EXIT to close the menu.

41