Connecting a cable or satellite box
Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see
You can connect your cable or satellite box using:
• HDMI® (best)
• AV (good)
• Coaxial (good)
HDMI® (best)
24" or 32" model
Note
If your TV is the 48" model, go to
Note
Images do not necessarily represent the exact design of your television.
On your TV
HDMI® cable
connector
HDMI® jack
1 Make sure that your TV's power cord is unplugged and all connected devices are turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI® cable (not provided) to an HDMI jack on the back of your TV and to the HDMI OUT jack on the
cable or satellite box.
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 On the Home screen, press
Note
An HDMI® cable carries both audio and video. You do not need to use any
audio cables.
Cable or
satellite box
Cable
wall jack
or
to highlight the HDMI 1, HDMI 2, or HDMI 3 tile, then press OK.
www.insigniaproducts.com
24"/32" 720p, 48" 1080p, 60Hz, LED Roku TV
What connection should I use?
48"model
on page 28.
HDMI® cable
on page 26.
Back of TV
27