Introduction
WARNING:
•
•
•
About this Manual
This guide contains information about the following Extron
board-designed fiber optic transmitters and receivers for the PowerCage Modular Power
Enclosures:
•
•
•
•
This guide includes instructions for an experienced installer to install, configure, and operate
the equipment.
NOTE:
The FOXBOX 4G Tx/Rx units output continuous invisible light, which may
be harmful and dangerous to the eyes; use with caution.
•
Do not look into the rear panel fiber optic cable connectors or into
the fiber optic cables themselves.
•
Plug the attached dust caps into the optical transceivers when the
fiber optic cable is unplugged.
About this Manual
About the PowerCage FOX 4G Transmitters and Receivers
Features
PowerCage FOX 4G Tx VGA transmitter
PowerCage FOX 4G Rx VGA receiver:
PowerCage FOX Tx DVI transmitter
PowerCage FOX Rx DVI receiver
In this manual, the term "PowerCage FOX 4G" refers to either an analog RGB
video or a DVI video unit. Where differences exist between the VGA and DVI
models, the unit's full name is used.
PowerCage FOX 4G DVI and PowerCage FOX 4G VGA • Introduction
®
PowerCage FOX 4G modular
1