Introduction - Extron electronics ExSens Instruction Manual

1

Introduction

This Instruction Manual generally describes operation, installation and maintenance
of the following ExTox-Products:
Transmitter of the ExSens-I Series
Transmitter of the ExSens Series
Transmitter of the Sens-I Series
Transmitter of the Sens Series
The transmitter types ExSens/Sens-I(nterface) dispose of a RS 485-Interface for
communication for the purpose of external calibration, adjustment and fault diag-
nosis. If you use the configuration and diagnosis software ExTox Com-Sens, which
is separately available, in combination with these types, please pay also attention
to the corresponding Instruction Manual. The Software offers additional possibilities
regarding configuration, maintenance and diagnosis. References within this text are
marked with ComSens.
Type specific data for each transmitter, such as for example measuring range,
measuring principle and operation conditions, should be taken from a corresponding
separate and specific Data Sheet. This Data Sheet forms consequently part of this
Instruction Manual. References on the Data Sheet within this text are marked with
DB.
Hints referring to the use of the transmitter in hazardous areas are marked with
Please read this Instruction Manual carefully before installation and initial operation
of the control unit. We kindly ask you to pay attention to all details and cross-
references.
We kindly ask you not to repair the transmitter or to perform any changes which go
beyond the measures described herein. Otherwise you endanger your own safety
and your warranty claims of merchantability. In such cases please contact ExTox or
authorised ExTox Service Partner. Third parties take the responsibility for correct
performance of work when maintenance and repairs are done by them.
On receipt of goods please take care that packing and consignment are not dam-
aged and the goods supplied correspond to the articles described in the delivery
note. Please do also compare with your order. In case of any damage please inform
your forwarding agent and your supplier. Please keep the damaged packing.
Please keep in mind that transmitters are sensitive measuring devices and take
special care when unpacking and installing them.
Page 4 of 20
ExTox Transmitter ExSens(-I) and Sens(-I)
Article-No. 253...
Article-No. 251...
Article-No. 213...
Article-No. 211...
Instruction Manual
.