Table of Contents
Advertisement
Introduction
This section gives an overview of the DTP3 T 203 and its features. Topics include:
•
About this Guide
•
Product Description
•
Features
•
Application Diagram
About this Guide
This user guide contains installation, configuration, and operating information for the DTP3 T 203.
NOTE: Throughout this guide, the general terms "switcher," "transmitter," and "switching transmitter" are used
interchangeably to refer to DTP3 T 203.
Product Description
The DTP3 T 203 is a three-input, multi-format switching transmitter consisting of a USB-C and two HDMI inputs
with simultaneous DTP3 and HDMI outputs. The switcher supports resolutions up to 4K @ 60 Hz at 4:4:4 chroma
sampling and embedded audio.
It provides reliable switching and transmission of HDMI video at data rates up to 18 Gbps, along with HDR, Deep
Color up to 12-bit, 3D formats, and HDBT compatibility.
Integrator-friendly features include EDID Minder, HDCP authorization, auto-switching between inputs, and
bidirectional RS-232 control up to 330 feet (100 meters) using one shielded twisted pair (STP) cable as the
transmission medium.
The switcher features can be integrated into many applications that use a DTP3-equipped receiver or HDBT-
capable products. Alternatively, the transmitter can be configured to provide power to the connected DTP3
receiver, allowing both devices to share one power supply.
The switcher can be controlled via the front panel, the RS-232 interface, USB, or LAN. Inputs can be selected by
pressing the front panel buttons, enabling auto-input switching, entering Simple Instruction Set (SIS) commands,
or using Extron Product Configuration Software (PCS) via LAN or USB.
Features
•
Transmits USB-C® video, HDMI, and control up to 330 feet (100 meters) over a shielded CAT6A
cable — The DTP3 T 203 provides high reliability and maximum performance on an economical and easily
installed cable infrastructure.
•
Inputs: One USB-C, two HDMI
•
Output: One DTP3 twisted pair output on RJ-45, one mirrored HDMI
•
Supports computer and video resolutions up to 4K/60 @ 4:4:4 — Support of 4K/60 at 4:4:4 chroma
sampling requires connection to matching DTP3 products.
•
Provides up to 60 watts of power to the USB-C source — Supports USB Power Delivery to negotiate
power to the USB-C device.
•
Auto-switching between inputs — Auto-switching allows for intuitive operation in collaboration spaces.
Multiple switching priority modes are available, including
last-connected input and user-selectable priority.
DTP3 T 203 • Introduction
1
Advertisement
Table of Contents
