Lighting And Shade/Drape Control; Caen Automation Enclosures - Crestron APAD Dimension Manual

Crestron

Lighting and Shade/Drape Control

CAEN Automation Enclosures

30 Crestron Doc. 4926A
Cutout Dimensions & Mounting Options
CAUTION: These enclosures house equipment that needs to be air-cooled.
Therefore, mount in a well-ventilated area. The ambient temperature range should be
32°F to 104°F (0°C to 40°C). The relative humidity should range from 0% to 90%
(non-condensing). Furthermore, allow adequate clearance in front of the vented
cover for servicing and ventilation.
NOTE: Enclosures are intended for indoor use only.
NOTE: When flush mounting, 5/8" drywall is preferred.
NOTE: Four keyholes are located within the enclosure and should be used if surface
mounting.
CAEN-Series enclosures are required to install CLX-Series lighting modules.
All measurements of length are in inches and weight is in pounds.
The lower keyholes are not symmetrically spaced within single-wide
enclosures.
Weight (empty) is the weight of an empty enclosure with cover.
Weight (filled) is the weight with the maximum number of modules
installed.
Cutout Dimensions & Mounting Options