Im-Ftcc-B - Crestron APAD Dimension Manual

Cutout Dimensions & Mounting Options

IM-FTCC-B

Cutout Dimensions & Mounting Options
QM-WMC and QM-WMIC
NOTE: The QM-WMIC can be installed when the QM-WMC is being installed or
after the QM-WMC has been installed. If the QM-WMIC is to be installed into an
existing QM-WMC installation, all electronic connections to the QM-WMC should
be removed prior to removing the QM-WMC from its two-gang electrical wallbox. A
three-gang box must replace the two-gang electrical wallbox.
The IM-FTCC-B is designed to mount in a horizontal surface, such as a desk top,
lectern, or podium. The following diagram illustrates the required opening size to
accommodate the IM-FTCC-B. Use the supplied template to make the cutout.
Cutout Dimensions
NOTE: Before inserting the IM-FTCC-B in the mounting hole, ensure that all
required cables have been installed.
Crestron
27
Crestron Doc. 4926A