Chv-Rts & Chv-Rths; Chv-Rss - Crestron APAD Dimension Manual

Cutout Dimensions & Mounting Options
CHV-RTS & CHV-RTHS

CHV-RSS

Sensor Position – Side View
Cutout Dimensions & Mounting Options
Crestron recommends that the sensor be placed inside a ½ inch Electrical Metallic
Tubing (EMT) conduit. This allows future sensor replacement, if required. The
radius of the bend at the wall should be approximately eight inches, to allow for
removal and replacement of the sensor.
Crestron
23
Crestron Doc. 4926A