Cutout Dimensions & Mounting Options
Keypads
C2N-CBF
Cutout Dimensions & Mounting Options
The following figure illustrates the supplied template used to prepare the hole in the
wall or other mounting surface for the flush mounting style Cameo keypad.
NOTE: Use only the original template, not a photocopy, to prepare the hole.
Photocopies usually alter the size of the image slightly, which would make the hole
the wrong size.
Be careful when cutting the hole, the spring clips on the keypad does not have
provision for positioning adjustment. Also, ensure that there is a sufficient clearance
area behind the mounting surface as shown on the template.
Crestron
25
Crestron Doc. 4926A