Extron electronics AXI 02 AT User Manual page 31

Renaming a Receiver
The default names shown in the Dante Receivers column are extracted from the
connected Dante device (
2
Analog-S/PDIF Out 2 because the analog outputs receive signal from the Dante network
and that signal is also mirrored to the S/PDIF output.
To rename an AXI Receiver:
From the Device menu on the Network View screen, select Device View, or press
1.
<Ctrl+D> on the keyboard. The Device View dialog box opens.
2. From the (Select a Dante Device...) drop-down menu, select the name of the
desired AXI device (see figure 24,
On the Device View screen, select the Receive tab (
3.
4. Click the name of the Receiver to be renamed. The name becomes a text field with a
cursor ( ).
3
5. Enter the new name (up to 31 characters) using any combination of letters, numbers,
and special characters except for @, =, and . (period).
6. Press <Enter> on the keyboard or click another channel name to confirm the new
name.
7. Repeat steps 4 through 6 to rename additional Receiver channels.
8. When finished renaming Receivers, close the Device View dialog box.
Figure 24. Renaming a Receiver
). The AXI Receivers are labelled Analog-S/PDIF Out 1 and
).
1
).
2
AXI 02 AT • Dante Controller 21