Extron electronics AXI 02 AT User Manual page 23

a. Pull — Pulls DSP configuration and preset name data from the device and
displays it in the DSP Configurator workspace. Pulling a configuration overwrites
the current configuration file open in DSP Configurator.
b. Push — Pushes the DSP configuration and preset data from the current
configuration file to the connected device. Pushing a configuration file overwrites
any configuration and presets currently on the device.
4. Click the Advanced... button to open the Advanced Push Options dialog box.
There are two options to choose from.
• Default — Pushes the entire configuration file including preset data.
Custom — Allows the user to push the configuration only, all presets only, or
•
selected presets only.
NOTE: If only pushing selected presets, the preset selection dialog box appears
5. Click OK. When the push or pull is completed, Current State is displayed in the
DSP Configurator status panel and the device is ready for further configuration.
Disconnecting from a Device
1. Click the Emulate button in the DSP Configurator Software menu bar (see figure 13,
). Alternatively, select Tools > Disconnect from Device or press <F6> on the
1
keyboard.
Figure 13.
Click OK to confirm (see figure 14,
Figure 14.
after clicking OK in the Advanced Push Options dialog box.
1
Emulate Button
1
1 1 1
Confirm Disconnect Dialog Box
).
AXI 02 AT • DSP Configurator Software 13