Table of Contents
Advertisement
Table 28 Expert Mode > WAN > NAT > Port Trigger (continued)
L ABEL
Name
Incoming Port
End Port
Trigger Port
End Port
Actions
9.7.1 Add Po rt T rig g e r Rule Sc re e n
Use this screen to configure your NBG6818's port trigger settings. Click
>
T rig g e r
Add Rule
Add Port Trigger Rule
Fig ure 51
Table 29 Add Port Trigger Rule
L ABEL
Name
Incoming Port
End Port
Trigger Port
End Port
Chapter 9 WAN
DESC RIPT IO N
This field displays a name to identify this rule.
This field displays a port number that a server on the WAN uses when it sends out a particular
service.
This field displays a port number or the final port number in a range of port numbers.
This field displays a port number that causes the NBG6818 to record the IP address of the LAN
computer that sent then traffic to a server on the WAN.
This field displays a port number or the ending port number in a range of port numbers.
Click the icons under
Ac tio ns
Click
to delete the rule.
Click
to edit the rule.
to show the following screen.
DESC RIPT IO N
Type a unique name (up to 15 characters) for identification purposes. All characters
are permitted - including spaces.
Incoming is a port (or a range of ports) that a server on the WAN uses when it sends
out a particular service. The ARMOR Z1 forwards the traffic with this port (or range of
ports) to the client computer on the LAN that requested the service.
Type a port number or the starting port number in a range of port numbers.
Type a port number or the ending port number in a range of port numbers.
The trigger port is a port (or a range of ports) that causes (or triggers) the ARMOR Z1
to record the IP address of the LAN computer that sent the traffic to a server on the
WAN.
Type a port number or the starting port number in a range of port numbers.
Type a port number or the ending port number in a range of port numbers.
NBG6818 User's Guide
to delete or edit an existing trigger port settings.
94
>
>
Expe rt Mo de
WAN
NAT
>
Po rt
Advertisement
Table of Contents
