Table of Contents
Advertisement
Table 17 USB Application > SAMBA (continued)
L ABEL
Work Group
Description
Require username
and password
User Accounts
No.
Status
User Name
USB
Actions
Apply
Cancel
8.4.1.1 Add SAMBA Ac c o unt Sc re e n
Use this screen to configure settings for a SAMBA account.
Click
USB Applic a tio n
Chapter 8 Applications
DESC RIPT IO N
You can add the NBG6818 to an existing or a new workgroup on your network. Enter the
name of the workgroup which your NBG6818 automatically joins. You can set the NBG6818's
workgroup name to be exactly the same as the workgroup name to which your computer
belongs to.
Note: The NBG6818 will not be able to join the workgroup if your local area
network has restrictions set up that do not allow devices to join a
workgroup. In this case, contact your network administrator.
Enter the description of the NBG6818 in a work group.
Select
to need a user account for access to the connected USB stick from any
Ye s
computer. Otherwise, select
Before you can share files you need a user account. Configure the following fields to set up
a file-sharing account.
This is the index number of the user account.
This field displays whether a user account is activated or not.
This field displays the user name that will be allowed to access the shared files.
This field displays the user's access rights to the USB storage device which is connected to
the NBG6818's USB port.
Click the icons under
Ac tio ns
Click
to delete an existing trigger port settings.
Click
to edit an existing trigger port settings.
Click
to save your changes back to the NBG6818.
Apply
Click
to begin configuring this screen afresh.
C a nc e l
>
>
to show the following screen.
SAMBA
Add Rule
NBG6818 User's Guide
68
.
No
to delete or edit a port forwarding rule.
Advertisement
Table of Contents
