Usb Media Sharing Screen - ZyXEL Communications ARMOR G1 NBG6818 User Manual

USB Application > FTP > Add Rule
Fig ure 34
The following table describes the labels in this screen.
Table 20 USB Application > FTP > Add Rule
L ABEL
Status
User Name
Password
USB
Upstream Bandwidth
Downstream Bandwidth
Apply
Cancel
8.4.3 USB Me dia Sha ring Sc re e n
Use this screen to configure settings for media sharing.
Chapter 8 Applications
DESC RIPT IO N
Select to enable the account.
Ena b le
Select to disable the account.
Disa b le
Enter a user name that will be allowed to access the shared files. You can enter up
to 20 characters. Only letters and numbers allowed.
Enter the password used to access the shared files. You can enter up to 20
characters. Only letters and numbers are allowed. The password is case sensitive.
Specify the user's access rights to the USB storage device which is connected to the
NBG6818's USB port.
- The user has read and write rights, meaning that the user can create
Re a d & Write
and edit the files on the connected USB device.
- The user has read rights only and can not create or edit the files on the
Re a d
connected USB device.
- The user cannot access the files on the USB device(s) connected to the USB
No ne
port.
Enter the maximum bandwidth (in Kbps) allowed for incoming FTP traffic.
Enter the maximum bandwidth (in Kbps) allowed for outgoing FTP traffic.
Click to save your changes back to the NBG6818.
Apply
Click to exist the screen without saving.
C a nc e l
NBG6818 User's Guide
71