Table of Contents
Advertisement
USB Application > FTP
Fig ure 33
The following table describes the labels in this screen.
Table 19 Expert Mode > Applications > File Sharing > FTP
L ABEL
Enable FTP
Port
User Accounts
No.
Status
User Name
USB
Upstream
Bandwidth
Downstream
Bandwidth
Actions
Apply
Cancel
8.4.2.1 Add FT P Ac c o unt Sc re e n
Use this screen to configure settings for a FTP account.
Click
USB Applic a tio n
Chapter 8 Applications
DESC RIPT IO N
Select this to enable the FTP server on the NBG6818 for file sharing using FTP.
You may change the server port number for FTP if needed, however you must use the same
port number in order to use that service for file sharing.
Before you can share files you need a user account. Configure the following fields to set up
a file-sharing account.
This is the index number of the user account.
This field displays whether a user account is activated or not. Select the check box to
enable the account. Clear the check box to disable the account.
This field displays the user name that will be allowed to access the shared files.
This field displays the user's access rights to the USB storage device which is connected to
the NBG6818's USB port.
This field shows the maximum bandwidth (in Kbps) allowed for incoming FTP traffic.
This field shows the maximum bandwidth (in Kbps) allowed for outgoing FTP traffic.
Click the icons under
Ac tio ns
Click
to delete an existing trigger port settings.
Click
to edit an existing trigger port settings.
Click
to save your changes back to the NBG6818.
Apply
Click
to begin configuring this screen afresh.
C a nc e l
>
>
to show the following screen.
FT P
Add Rule
NBG6818 User's Guide
70
to delete or edit a port forwarding rule.
Advertisement
Table of Contents
