Table of Contents
Advertisement
Settings > System > Operation Mode
Fig ure 86
The following table describes the labels in this screen.
Table 49 Settings > System > Operation Mode
L ABEL
Standard Mode
Bridge Mode
Apply
Cancel
Note: If you select the incorrect system operation Mode you may not be able to connect to
the Internet
13.8 L o g s Sc re e n
Use this screen to see the logged messages for the NBG6818.
You can configure which logs to display in the Log screen.
The newest log replaces the oldest log after it fills. Select what logs you want to see from the
drop-down list box. The log choices depend on your other settings in the
renew the log screen. Click
all the logs.
Chapter 13 System
DESC RIPT IO N
Select
if your device routes traffic between a local network and
Sta nda rd Mo de
another network such as the Internet. This mode offers services such as a firewall or
bandwidth management.
You can configure the IP address settings on your WAN port. Contact your ISP or
system administrator for more information on appropriate settings.
Select Bridge Mode if your device bridges traffic between clients on the same
network.
•
In Bridg3e Mode, all Ethernet ports have the same IP address.
•
All ports on the rear panel of the device are LAN ports, including the port labeled
WAN. There is no WAN port.
•
The DHCP server on your device is disabled.
•
Router functions (such as NAT, bandwidth management, remote management,
firewall and so on) are not available when the NBG6818 is in Bridge Mode.
•
The IP address of the device on the local network is set to 192.168.123.2.
Click
to save your settings.
Apply
Click
to return your settings to the default (
C a nc e l
to save the current list of logs to your computer. Click
Expo rt
NBG6818 User's Guide
139
).
Sta nda rd
L o g T ype
screens. Click
Syste m
Re fre sh
to delete
C le a r
to
Advertisement
Table of Contents
