Table of Contents
Advertisement
SECTION 8—TROUBLESHOOTING
SECTION 8—TROUBLESHOOTING
If oxygen conserving regulator fails to function, consult the
Troubleshooting guide. If problem cannot be corrected,
consult your Dealer/Home Care equipment provider.
PROBLEM
No flow.
Unit does not pulse.
Unit flows or pulses
continuously.
Replacement Parts - Accessories
HF2POST6BAG Carrying Bag or HF2POST9BAG Carrying Bag
Invacare® Element™
POSSIBLE CAUSE
1. Cylinder valve is closed.
2. Regulator in "Off"
position.
3. Cylinder empty.
4. Oxygen conserving
regulator not sensing
breath.
5. Oxygen cannula is
blocked or kinked.
1. Unit is set to the "CF"
position.
2. Unit was not set to
"OFF" prior to opening
the cylinder valve.
3. Vent hole is obstructed.
22
SOLUTION
1. Turn the cylinder valve to
the "ON" position.
2. Set to prescribed setting.
3. Replace cylinder.
4. Check position of
cannula in nose. DO
NOT breathe through
mouth.
5. Remove kinks. Clean or
replace, if necessary.
1. Turn the selector switch
to the appropriate
delivery setting.
2. Turn the selector switch
to "OFF," wait a few
moments, then set at
proper delivery setting.
3. Remove obstructions,
such as labels or carrying
bag, and resume use as
usual.
Part No 1160840
Advertisement
Table of Contents
