Section 2-Features - Invacare Element IOC100P User Manual

SECTION 2—FEATURES
SECTION 2—FEATURES
This product is not intended as a life‐sustaining or
life‐supporting device.
Missing or illegible labels MUST be replaced. Contact customer
service at the number on the back page.
Model IOC100P
Cylinder Post Valve
T-Handle Clamp
CGA870 Seal Washer
Selector Switch
Cylinder Post Valve T‐Handle Clamp: This is used to attach the
unit to any CGA870 post‐valve cylinder.
Oxygen Pressure Gauge: Enables the user to monitor the
contents of the compressed oxygen cylinder and is protected by
a rubber guard.
Invacare® Element™
DANGER
CAUTION
FIGURE 2.1 Model IOC100P
Cylinder Alignment Pins
Oxygen Pressure Gauge
w/ Rubber Guard
Oxygen Supply
Outlet Fitting
Vent Hole
10 Part No 1160840