SECTION 2—FEATURES
Selector Switch: Enables the user to select the desired setting, as
well as "OFF" and "CF" (continuous flow). When not in use, the
switch should be turned to the "OFF" position.
Oxygen Supply Outlet: Use this fitting to attach a standard
cannula.
Cylinder Alignment Pins: When assembling the unit, these
parallel pins MUST be inserted into the holes on the CGA870
post valve.
CGA870 Seal Washer [Metal Washer with Viton
or equivalent
®
Seal]: Creates the interface between the post valve and the
conserver regulator. Besides offering a rugged interface, it also
surrounds the oxygen path in a ring of stainless steel or brass.
Vent Hole: Maintains proper internal pressure. DO NOT
obstruct with any object, such as a label or tight‐fitting carrying
bag.
NOTE: Use only a CGA870 Seal Washer [Metal Washer with Viton
Seal]. DO NOT use a plastic compression gasket.
FIGURE 2.2 Connection view of the IOC100P with CGA870
Connection
Part No 1160840
11
Invacare® Element™