Adjusting the dashboard/display brightness
NOTE: During this adjustment bear in mind that the illumination will always be greater with the marker lights off,
whereas with the marker lights on there will automatically be a decrease in the brightness of the display.
Brightness of warning lights and indicator pointers
1. With the panel powered, press and hold down the
switch (2) on the up arrow (C) for 3 seconds
2. The central display will show the detail (S1).
3. Release the direction key to pass on to the next screen
(S2).
4. Press switch (2) on symbol (C) to increase or on sym-
bol (D) to decrease the brightness of the warning lights
and hands of the indicators, to set the required bright-
ness.
NOTE: If you want to stop the adjustment without saving, press the switch (1) on the symbol (A) to exit the adjustment.
3 - CONTROLS AND INSTRUMENTS
GNIL14TR00585FA
5. Press the switch (1) on the symbol (B) to save the
6. Two seconds after saving you are automatically re-
7. Press the switch (2) on the symbol (D) again to exit
3-22
1
setting.
turned to the initial condition.
the programming menu.