Transmission - Control Identification - New Holland Workmaster 50 Operator's Manual

3 - CONTROLS AND INSTRUMENTS

Transmission - Control identification

Transmission shuttle lever
The shuttle shift lever (1) is used to engage the transmis-
sion into forward or reverse. You must depress the clutch
pedal in order to shift the transmission . Move the lever
forward to enable the tractor to travel forward and rear-
ward to enable the tractor to travel in reverse.. The shuttle
lever must be in the neutral (middle) position to activate
the safety start system and allow the engine to start.
1
GNIL14TR00512AA
3-13