Wheels And Tires; Transmission Oil Level Or Hydraulic Oil Level - New Holland Workmaster 50 Operator's Manual

3. Block the wheels, front and rear, unlock the brake ped-
als and release the parking brake lever.
4. Loosen the locknut (1) on the brake pull rod (2) and
turn the adjuster nut (3) clockwise to reduce the play
and counter-clockwise to increase the play. .Ensure
that the pedals have same travel
5. Lock the brake pedals together and road test to ensure
that the brakes are adjusted equally and will stop the
tractor in a straight line.
6. Adjust thelinkages if needed to balance the brakes

Wheels and tires

1. Check the front and rear wheel nuts for tightness.
2. The specified torque values are shown in the table for
reference.
Front disc to hub bolts
Rear disc to hub bolts
Rear disc to rim nuts
Rear wheel weight to disc
Tire Pressures and Condition
Check and adjust the front and rear tire pressures and
inspect the tread and side-walls for damage.
3. Adjust the tire pressures to suit the load being carried.

Transmission oil level or hydraulic oil level

1. The oil level should be between the high and low marks
on the dipstick (1).
7 - MAINTENANCE
123 N·m (91 lb ft)
192 N·m (142 lb ft)
239 N·m (176 lb ft)239 N⋅m (176 lb ft)
150 N·m (111 lb ft)
7-17
2
GNIL14TR00520AA
1
86090135N