Bulbs - New Holland Workmaster 50 Operator's Manual

Bulbs

Stop/Turn/Position lights, bulb replacement
1. The bulbs are accessible after removal of the plastic
lenses assembly.
2. Remove the two screws (1) and take out the lens as-
sembly (2).
3. The bulbs can be removed by pressing in and turning
approximately 20 degree counterclockwise. Reassem-
ble in reverse order.
4. Tail light (3) and flasher/turn signal light (4)
NOTICE: When replacing the lenses, take care not to overtighten the retaining screws.
Bulb Size
• Tail Light - #1157
• Flasher/Turn Signal - #1156
7 - MAINTENANCE
7-47
1
20108813
2
20108814