Adjusting The Dial-A-Height; Positioning The Seat; Using The Headlights; Positioning The Tilt Steering Wheel - New Holland LS35-16H Operator's Manual

2. Pull attachment lift lever rearward until latch locks. In
this position the lift will hold the attachment in the up,
or raised position.
Lowering Attachments
1. Depress the brake pedal to stop the machine.
2. Pull attachment lift lever rearward, to release lift
pressure, and push the button on top to release the
latch. Move lift lever forward to lower attachment.
2
1
Figure 11
1. Lift lever
2. Button
3. Dial-A-Height

Adjusting the Dial-A-Height

The Dial-A-Height control (Fig. 11) is used to limit the
downward travel of the attachment. The Dial-A-Height
knob is rotated to change the location of this stop, up or
down.
1. Raise the attachment lift lever: Refer to Raising
Attachments. In the raised position the Dial-A-Height
knob (Fig. 11) can be rotated to change the stop
location. Turn clockwise to raise and counterclockwise
to lower the height of the attachment.
2. The Dial-A-Height indicator (Fig. 11) will show the
change, high to low, in attachment lift height as
adjustment is made.

Positioning the Seat

The seat can move forward and backward. Position the
seat where you have the best control of the machine and
are most comfortable.
3
5
4
6
1205
4. Indicator
5. High
6. Mounting position
18
1. Pull the seat adjustment lever toward the rear to
release the lock (Fig. 12).
2. Slide the seat to the desired position and release the
lever to engage lock.
2
1
Figure 12
1. Release
2. Lock

Using the Headlights

The headlights are turned on with a separate position,
lights, of the ignition switch (Fig. 13). The lights are on
while the ignition switch is in the lights position even
with the engine off. Remove the key when the machine is
left unattended so lights can not be turned on discharging
the battery.
Figure 13
1. Lights
Positioning the Tilt Steering
Wheel
The steering wheel has four tilt locations. Position the
steering wheel where you have the best control of the
machine and are most comfortable.
1. Lift the tilt lever to release the lock (Fig. 14).
2. Move the steering wheel to a comfortable position;
then release the lever to lock.
1229
1
1208