Product Identification; Machine Identification Plate; Chassis Identification - New Holland T7.240 Operator's Manual

Product identification

The tractor and major components are identified using se-
rial numbers and / or manufacturing codes.
The identification data must be supplied to your NEW
HOLLAND dealer when requesting parts or services, also
providing tractor identification in the event of theft.
The following provides the locations of the identification
data.

Machine identification plate

The vehicle identification plate is located on the left-hand
side of the front axle support, close to the support for the
front weights. Take note of the information and record it
in the fields below:
.
Series No :________________
.
Chassis No :________________
model:________________

Chassis identification

The serial number and model identification information is
stamped on the front support (1). These numbers are also
repeated on the vehicle identification plate reproduced
above.
1 - GENERAL INFORMATION
1-3
1
CUIL14TR00004AA
2
1-3