Adjusting The Cruise Control Speed; Following Distance; Following Distance Adjustment Switch; What To Expect When Using Bendix Wingman Acb - BENDIX Wingman ACB Service Data

Table of Contents

ADJUSTING THE CRUISE CONTROL SPEED

The "+/-" switch of the vehicle cruise control system is

used to increase (+) or decrease (-) the vehicle set speed.

When adjusted, the new set speed will be indicated on

the vehicle dash. The new set speed is displayed on the

message center, speedometer or other location on the

dash.

Following distance refers to the time gap, measured in

seconds, between the vehicle with Wingman

the vehicle ahead. The actual physical distance between

your vehicle and the vehicle ahead will vary based on the

speeds of both vehicles; however, the set gap will remain

the same for all set cruise speeds.

FOLLOWING DISTANCE ADJUSTMENT

SWITCH

This optional ACB feature, allows the driver to adjust the

following distance or time gap. The availability of this

feature is determined by the vehicle manufacturer. The

switch has an increase or decrease function. Pressing

increase (+) will provide a larger following distance,

measured in seconds. Pressing decrease (-) will provide

a shorter following distance.

WHAT TO EXPECT WHEN USING BENDIX

WINGMAN

Table 1 illustrates what to expect from the Bendix

Wingman

the system indication and action to expect from the system

are illustrated.

NOTE: These represent examples of typical situations and

responses that may occur when using Bendix

ACB. All possible situations and responses are not covered

in this table.

ACB and

ACB

ACB system in various driving situations. Both

Wingman

Table of Contents