Bendix ® Acb Alignment Tool; Check Vertical Alignment - BENDIX Wingman ACB Service Data

Magnetic
Attachments (3)
Vertical Alignment
Bubble Level
FIGURE 12 - BENDIX ® ACB ALIGNMENT TOOL
®
BENDIX ACB ALIGNMENT TOOL
®
The Bendix ACB Alignment Tool is used to align the ACB
sensor both vertically and laterally. It fastens magnetically
to the ACB sensor assembly for easy placement and
removal. See Figures 12-14.

CHECK VERTICAL ALIGNMENT

Tools needed: Bendix ®
If the vehicle has an air suspension system, the system
must be charged prior to alignment. If the system is not
charged, the vertical alignment will be off and the system
will not perform correctly.
Magnetic
Attachments
FIGURE 13 - ATTACHING THE ALIGNMENT TOOL
22
Lateral Alignment
Laser Level
ACB Alignment Tool.
Sensor
Lateral Alignment
Laser Level
Vertical Alignment
Bubble Level
FIGURE 14 - ALIGNMENT TOOL ATTACHED TO BRACKET
Bubble Centered Between
Good
Lines With Equal Gaps On
Vertical
Alignment
Bad
Vertical
Alignment
Bubble Not Centered
FIGURE 15 - VERTICAL ALIGNMENT INDICATION
If the vehicle has stationary object warning enabled, a
digital inclinometer must be used for vertical alignment as
described in step 1. Use the ACom
tab to verify if stationary object warning is enabled. See
Figure 21.
1. Park the vehicle on a fl at, level surface. (Note: If the
service technician is unable to park the vehicle on a
level fl oor, a digital inclinometer can be used to align
the sensor vertically. First, zero the inclinometer on
the frame rail. Then, use it in place of the bubble level
in the vertical alignment process.)
Both Sides
Between Lines
®
software confi guration