Set Program Schedule 5+1+1 Or 7 Day - Robertshaw RS9110 Operation Manual

Set Program Schedule 5+1+1 or 7 Day

To customize your program schedule, follow these steps:
1. Select HEAT or COOL with the system switch. Note: You have to program
heat and cool separately.
2. Press the MENU button (If menu does not appear first press RUN SCHED).
3. Press SET SCHED. Note: Monday-Friday (or Monday if in 7 Day) is
displayed and the WAKE icon is shown. You are now programming the
wake time period for that day.
4. Time is flashing. Use the
that day's WAKE time period.
5. Press NEXT STEP.
6. The setpoint temperature is flashing. Use the
your setpoint selection for that day's WAKE time period.
7. Press NEXT STEP.
8. Repeat steps 4 thru 7 for that day's LEAVE time period,
RETURN time period, and SLEEP time period.
or key to make your time selection for
Continued on next page...
PROGRAMMING
or key to make
9