Set Time And Day; Default Settings; User Programmable Settings (Default) - Robertshaw RS6110 User Manual

Set Time and Day

To adjust the time and day settings press the SET TIME button. The hour
will flash. If a button is not pushed in 10 seconds the thermostat returns to
operation. To change the settings:
1. Use the
2. Press the SET TIME button to move through hour, minutes and day
of week.
3. Make changes as needed. They will be saved automatically.
NOTE: THE THERMOSTAT WILL NOT CORRECT
FOR DAYLIGHT SAVING TIME.
The thermostat will now function properly using the default schedule.

Default Settings

This thermostat is preprogrammed with a schedule that is recommended
by EnergyStar™. The schedule is designed to lower energy costs
year-round.
The default schedule settings are:
Morn
Day
Eve
Nite

User Programmable Settings (Default)

During any program changes the display returns back to the operating
display if a button has not been pushed in 10 seconds.
The temperature scale is set to Fahrenheit.
Night light is off.
The first stage differential is 1F degree.
The second stage differential (RS6220) is 2F degrees.
Auto changeover deadband is 3F degrees.
Filter reminder length is off.
Temperature offset is 0 degrees.
The HI heat limit is 90°F (32°C).
The LO cool limit is 45°F (7°C)
and buttons to change the flashing number.
T T i i m m e e
6:00 am
8:00 am
6:00 pm
10:00 pm
C C o o o o l l i i n n g g ° ° F F
78
85
78
82
4
H H e e a a t t i i n n g g ° ° F F
70
62
70
62