Programming; Set Time - Robertshaw RS9110 Operation Manual

PROGRAMMING

Set Time

1. Press the MENU button.
2. Press SET TIME.
3. Day of the week will be flashing. Use the
select the current day of the week.
4. Press NEXT STEP.
5. The current hour is flashing. Use the
the current hour. When using 12-hour time, make sure the correct
a.m. or p.m. choice is selected.
6. Press NEXT STEP.
7. Minutes are now flashing. Use the
current minutes.
8. Press DONE when completed.
8
or key to
or key to select
or key to select