Setting Time And Day; Programming Guide; Programming Your Thermostat - Robertshaw C8601 User Manual

110-1103B.qxd 3/14/05

Programming Guide

heat off cool
auto on
MON
° F
set
run/set temp vac
prog hold hold clock
select
SETTING TIME OF DAY AND
DAY OF WEEK
1. Press SELECT until the cursor is
over SET CLOCK. Press SET. The
HOURS segment will be blinking.
Use the or button to adjust
the time. NOTE: The AM or PM
indicator will change as the
HOURS display rolls through a 24
hour cycle.
2. Press SET. The MINUTES segment will be blinking. Use the
button to adjust the MINUTES setting.
3. Press SET. The DAY segment will be blinking at the top of the
display. Use the
Press SET.

PROGRAMMING YOUR THERMOSTAT

The C8601 thermostat features 1-button programming. Simply follow
these steps to customize your thermostat for your lifestyle.
1. Place the HEAT-OFF-COOL switch into the
HEAT position. Make sure the cursor is in
the RUN/SET PROG position. Press SET.
The HOURS segment will be blinking.
MON thru FRI (the work week) will be dis-
played across the top. AM1 will be illuminated in the lower right
hand corner. You can now start programming the first event of the
work week.
2. Use the or button to adjust the hour of the first event. Press SET.
3. The MINUTES segment will be blinking. Use the
adjust the minutes. Press SET.
4. The temperature should be blinking. Use the
adjust the desired temperature of the first event. Press SET.
5. AM2 should now be displayed. Repeat
steps 2-4 to program the remaining events
(PM1 and PM2) for the work week. There
are a total of 4 events.
2:31 PM Page 7
o on
Cursor
set
run/set temp vac set
prog hold hold clock
select
MON = MONDAY
TUE = TUESDAY
WED = WEDNESDAY
THU = THURSDAY
FRI = FRIDAY
SAT = SATURDAY
SUN = SUNDAY
or button to adjust the day of the week.
7
set
or
or button to
or button to