Table of Contents
Advertisement
English
Do not turn the engine over on the starter with
the spark plug boot or spark plug removed
unless the slide control / stop switch is on STOP
or 0 since there is otherwise a risk of fire from
uncontained sparking.
To reduce the risk of fire, do not service or store
your machine near open flames.
Check the fuel filler cap for leaks at regular inter‐
vals.
Use only a spark plug of the type approved by
STIHL and make sure it is in good condition –
see "Specifications".
Inspect the ignition lead (insulation in good con‐
dition, secure connection).
Check the condition of the muffler.
To reduce the risk of fire and damage to hearing,
do not operate your machine if the muffler is
damaged or missing.
Do not touch a hot muffler since burn injury will
result.
Vibration behavior is influenced by the condition
of the AV elements – check the AV elements at
regular intervals.
For safety reasons, the tea plant pruner may only
be operated with the following cutting attach‐
ment:
Circular saw blade 250-100 (scratcher tooth)
Circular saw blades made of any other non-metal
material are not permitted.
2.11
Symbols on Deflectors
1
Arrows on top of the circular saw blade (1) and
limit stop (2) show the correct direction of rota‐
tion.
2.12
Harness
► Use a shoulder strap.
8
2
2 Safety Precautions and Working Techniques
2.12.1
Shoulder strap with 2 carabiners
(included with machine)
► Attach the shoulder strap to the machine.
► With the engine running, put on the shoulder
strap with the machine.
2.12.2
Shoulder strap with 1 carabiner (spe‐
cial accessory)
► With the engine running, attach the machine to
the shoulder strap.
2.13
Circular Saw Blade
For cutting shrubs up to a stem diameter of 6 cm.
Before starting the cut, accelerate the engine up
to full throttle. Perform cut with uniform pressure.
Use circular saw blade only with a matching limit
stop of the correct diameter.
0458-262-0121-C
Advertisement
Table of Contents
