12 Fitting the Harness
12.2.3
Adjusting the straps
Adjust the length of the straps with the front
(arrow) and rear sliding adjusters.
12.2.4
Tightening the straps
► Pull the end of the strap down to tighten the
strap.
12.2.5
Loosening the straps
0458-262-0121-C
► Push the sliding adjuster up to loosen the
strap.
► Adjust the length of the strap so that the
machine and cutting attachment point down‐
wards at a shallow angle.
12.2.6
Removing the machine
► Grip the handle support with your right hand
and lift the machine.
► Lift the strap off your left shoulder and over
your head with your left hand.
12.3
Shoulder Strap with 1 Carabi‐
ner (special accessory)
The shoulder strap with 1 carabiner requires a
carrying ring between the handle support and
padding.
Use either the front carrying ring or an additional
carrying ring (available as special accessory).
English
17