Operation - MULTIQUIP Whiteman J36 Series Operation Manual

NOTICE
The trowel is heavy and awkward to move around. Use
proper heavy lifting procedures and DO NOT lift the
trowel by the guard rings.
Lifting Bale
The lift bale provides an optimal lift point for lifting the trowel.
When lifting the trowel onto a concrete slab, attach a chain
or rope to the lifting bale. Make sure the lifting device has
adequate lifting capacity to lift the trowel.
Using a crane or forklift (Figure 22) to lift the trowel is highly
recommended, and is perfectly safe for the trowel. ALWAYS
use extra care when lifting the trowel off the ground.
Figure 22. Lifting the Trowel
CAUTION
NEVER lift the trowel to unnecessary heights. DO NOT
stand underneath the trowel while it is being lifted.
Serious damage to the machine or personal injury
could be caused by dropping a trowel.
J36/B46-M30 SERIES WALK-BEHIND TROWELS • OPERATION MANUAL — REV. #0 (10/27/16) — PAGE 27
*Always follow manufacturer instructions*
*AAA Rent-All 225-291-1356*
Starting the Engine
1. Place the engine fuel valve lever (Figure 23) in the
OPEN position.
HONDA GX
FUEL
VALVE
LEVER
OPEN
Figure 23. Engine Fuel Valve Lever (ON)
2. Place the engine ON/OFF switch (Figure 24) in the
ON position
Figure 24. Engine ON/OFF Switch (ON)
3. Pull the throttle lever (Figure 25) backwards and place
in the "idle" position.
IDLE
THROTTLE
LEVER
Figure 25. Throttle (Idle Position)

OPERATION

ROBIN-SUBARU
FUEL
VALVE
LEVER
CLOSE
OPEN
OPEN
ON
ENGINE
ON/OFF
SWITCH