Setting Up The Optional Bobbin Winder; Connecting The Ac Adapter - Brother 884-T23 Operation Manual

Setting up the optional bobbin winder

a Insert the spool pin and the spool cushion.
Insert the spool pin holder, and then insert the spool pin
straight into the hole. Place the spool cushion on the
spool pin.
1 Spool pin
2 Spool pin holder
3 Hole for spool pin
4 Spool cushion
b Insert the thread guide.
Insert the thread guide straight into the hole with the
pins on the thread guide aligned with the notches on the
sides of the hole.
1 Pins on thread guide
2 Notches on hole for thread guide
3 Hole for thread guide
• Firmly insert the thread guide as far as possible and
make sure that it is secure.
124

Connecting the AC adapter

a Insert the plug of the power supply cord into the AC
adapter.
b Plug the cord on the AC adapter into the DC input
connector of the bobbin winder, and then insert the
plug of the power supply cord into a household
electrical outlet.
• Be sure to firmly insert the plug on the AC adapter
into the DC input connector of the bobbin winder.
CAUTION
• Be sure to use the included AC adapter and
power cord of the bobbin winder.
• Before connecting or disconnecting the AC
adapter, be sure that the unit is not operating.
• After using the bobbin winder, disconnect it
from the electrical outlet.