Bobbin Winder (Optional) - Brother BES-116 Instruction Manual

3-7 Bobbin winder (optional)

Attaching bobbin winder
y
i
o
5. Remove the thread guide screw, and then remove the thread guide u from the thread guide
bar i.
6. Remove the screws, and arm cover (R) o from the machine head.
7. Install the accessory cotton stand (L) !0 with the screws, and then install it together with the
arm cover (R) o.
8. Install the thread guide bar i and the thread guide u.
t
w
q
e
r
u
BES-116AC
Chapter 1 Preparation of Embroidery Machine
1. Loosen the eight screws q and remove
table (L) w.
2. Attach spool shaft t to table (L) w with the
washer e and the nut r.
3. Attach table (L) w to th machine body with
the eight screws q.
4. Pass spool mat y through spool shaft t.
o
!0
u
i
21