Stopping Embroidering - Brother 884-T23 Operation Manual

b Press the "Start/Stop" button.
Press the "Start/Stop" button while it is flashing in green.
If the "Start/Stop" button returns to being lit in red,
perform this procedure again from step
 The "Start/Stop" button lights up in green and begins
embroidering the first color.
1
1 The thread color for the needle bar that is currently being
used for embroidery or will soon be used for embroidery
appears at the top of the thread color sequence display.
The remaining thread colors are listed in embroidering
order, starting from the top.
2 A blue frame appears around the thread information box
of the needle bar currently being selected.
• While the machine is embroidering, the point being
embroidered is indicated by the green cross hairs in
the pattern display area. In addition, the number of
stitches and the time count up.
c After embroidery of the first color is finished, the
machine automatically stops and trims the thread. The
needle bar case moves to the second color position and
embroidery of the second color begins.
 The thread color display in the screen continues to
the second color, and the thread information for the
second needle bar is surrounded by the blue frame.
d This continues until the last color is embroidered, and
the machine automatically stops.
 The embroidering settings screen reappears.
 The "Start/Stop" button lights up in red.
• No thread trimming operations at the beginning of
stitching and at the end of stitching are necessary.
• When embroidering a pattern that contains seven
a
.
■ Continuing embroidering
To embroider the same pattern again, touch
2
 The embroidering screen appears so the same pattern
To select a new pattern, touch
 The pattern type selection screen appears.
• Automatic lock stitch setting can be set so that it is

Stopping embroidering

The machine can be stopped during embroidering.
■ Temporarily pausing
Press the "Start/Stop" button.
a
 The machine stops and the "Start/Stop" button lights
• Embroidering can also be stopped by touching an
• The thread is not trimmed.
• To continue embroidering, after checking that the
• If the reserve stop key is touched while embroidery
• Before starting to embroider, the machine can be
BASIC EMBROIDERY
Memo
or more colors, it is necessary to change the thread
spools. (page 86)
can be embroidered again.
Memo
performed at the beginning of the embroidery,
when starting to embroider after changing thread
colors, and when trimming the thread. (page 72)
up in red.
area displaying the pattern.
upper thread is taut, touch the unlock key, and then
press the "Start/Stop" button.
Memo
is being performed, the machine stops
embroidering before the next color begins.
(page 105)
set to stop at any thread color change. (page 105)
.
2
.
83