How Can I Find The Wireless Security Information (Ssid And Network Key) - Brother 884-T23 Operation Manual

Error messages
57 This file cannot be used.
58 This pattern cannot be used since it exceeds the
data capacity.
59 This pattern cannot be used.
60 This pattern cannot combine.
61 Trimming sensor error.
62 USB media error
63 USB media is not loaded. Load USB media.
64 Wiper error
65 X-axis home position error.
66 XY moving error.
67 Y-axis home position error.

How can I find the wireless security information (SSID and network key)

1. You should see the documentation provided with your wireless access point/router.
2. The default SSID (wireless network name) could be the manufacturer's name or the model name.
3. If you do not know the security information, please consult the router manufacturer, your system administrator, or Internet
provider.
4. Some SSIDs and network keys (passwords) are case (upper case and lower case) sensitive. Please properly record your
information.
*
The network key may also be described as the password, security key or encryption Key.
*
If the wireless access point/router is not broadcasting the SSID, the SSID will not automatically be detected. You will have to manually
enter the SSID.
a
154
Cause/solution
This message is displayed when the file format is incompatible with this
machine. Check the list of compatible file formats. (page 156)
This message is displayed when the pattern has too many stitches and
cannot be used. Data with stitches that exceed specifications (500,000
stitches) cannot be displayed. Use data design software to reduce the
number of stitches.
This message is displayed when you try to retrieve a pattern that was
downloaded for a different machine.
This message is displayed when a split (large-size) pattern is selected to be
combined with another embroidery pattern.
This message is displayed when lint or dust may have accumulated within
the moving knife, the fixed knife, the thread retaining plate, and their
surrounding areas. Clean them. (page 138)
This message is displayed when USB media cannot be read correctly or
when USB media is damaged. Touch
This message is displayed when you tried to recall or save a pattern while no
USB media is loaded. Load USB media.
This message is displayed when you try to use incompatible USB media. For
a list of compatible USB media, visit http://s.brother/cpban/ .
This message is displayed when thread is tangled on the wiper. Remove the
tangled thread.
This message is displayed when lint or dust may have accumulated within
the moving knife, the fixed knife, the thread retaining plate, and their
surrounding areas. Clean them. (page 138)
This message is displayed when the thread does not pass through the
groove in the thread cutter. Pass the thread through the groove securely.
When this message is displayed, consult your nearest authorized Brother
dealer.
When this message is displayed, either replace the embroidery frame with a
larger one or return to the pattern editing screen and move the pattern
position.
When this message is displayed, consult your nearest authorized Brother
dealer.
1 SSID
2 Network key (password)
and try again.