Brother 884-T23 Operation Manual page 87

Display
No.
Key Name
This red line indicator shows
4
when the thread spools will
Spool change
need to be changed.
indicator
Quit embroidering and
return to the embroidering
Embroidery
settings screen.
setting key
While embroidering, touch
this key for the machine to
Reserve stop
stop prior to the next color
key
beginning.
Switch spool
key
Change the needle bar
(Not available
settings from the screen
in the
without changing the thread
[Manual
spools on the machine.
Color
Sequence]
mode)
Enable the needle bar
Temporary
settings to manually be
needle bar
specified.
5
settings key
Move the needle forward or
backward through the
stitching. Use this key in the
following situations:
• If the thread breaks or runs
Forward/
out while embroidering
Backward
• To restart embroidering
stitch key
from the beginning
• To continue embroidering
after the machine was
turned off
Specify the maximum
embroidery speed.
• Specify a low speed for
thin, thick or heavy
Maximum
fabrics.
embroidery
• When using a weak thread
speed key
such as metallic thread,
specify an embroidery
speed of 400 spm.
Unlocks the machine so it
can start embroidering
within 10 seconds. When
6
this key is touched, the
Unlock key
"Start/Stop" button flashes in
green.
Function Page
87
—
105
58
106
89
156
82
Display
No.
Key Name
Shows the amount of time
until the machine will stop.
When the last thread spool is
being embroidered, the
number appears in red.
Time until the
If the thread color needs to
machine stops
be changed, this shows the
time until the thread spool
will need to be changed.
The bottom value shows the
total number of thread colors
in the pattern and the top
Embroidering
value shows the thread color
order
that is currently being
7
embroidered.
The bottom value shows the
total number of stitches in
the pattern and the top value
shows how many stitches
Stitch count
have already been
embroidered.
The bottom value shows the
total amount of time required
to embroider the pattern and
Embroidering
the top value shows how
time
much time has already
passed embroidering.
Move the needle bar position
to the selected needle bar
number. Use when threading
the needle with the
Needle bar
automatic needle-threading
key
mechanism.
8
Shows the color and the
thread color name (number)
Thread color for the thread on the needle
set up display bar indicated on the key.
Thread the machine as
indicated here.
Memo
• The thread color numbers in the thread color
sequence display and the thread color set up
display can be changed, for example, to the color
name or the thread color number for other brands.
(page 109)
BASIC EMBROIDERY
Function Page
86
—
—
—
—
76
85
2