Using The Memory Function; Saving Embroidery Patterns; Retrieving Embroidery Patterns - Brother 884-T23 Operation Manual

USING THE MEMORY FUNCTION

Saving embroidery patterns

Note
• Do not turn the main power to OFF while the
[Saving...] screen is displayed. You will lose the
pattern you are saving.
• Embroidery patterns cannot be transferred via
wireless transmission if the computer and machine
are connected to different networks. Be sure to
connect to the same network.
• For details on supported computers, refer to
"SPECIFICATIONS" on page 156.
Touch when the pattern you want to save is in
a
the embroidering settings screen.
b Touch the desired destination to start saving.
1
2
1 Save to the machine's memory.
2 Save to the USB media. The pattern is saved in a folder
labeled [bPocket].
When saving the embroidery pattern in a USB media,
insert the USB media into the USB port on the machine.
3 Save to the computer.
When saving the embroidery pattern to a computer, use
the included USB cable to connect the machine to the
computer. The machine will be recognized as a
temporary, removable disk on the computer.
• The file will be saved to the removable disk. To save
the file to a more permanent folder in the computer,
116
open File Explorer, select the removable disk, then
copy the PHX file to the destination folder.
4 Save the pattern to the computer via the wireless

Retrieving embroidery patterns

a Touch the desired destination, and then select the
desired embroidery pattern.
1 Retrieve from the machine's memory.
2 Retrieve from a USB media.
3 Retrieve from a computer.
4
3
4 Retrieve the pattern via the wireless network connection.
• If the embroidery pattern to be retrieved is in a
folder of the USB media, touch the key for that
folder. Touch
b Touch
*
*
network connection. For detailed procedures, refer to
PE-DESIGN manual (version 11 or later).
1
2
When retrieving the patterns from a USB media, insert
the USB media into the USB port on the machine.
When retrieving the patterns from a computer, use the
included USB cable to connect the computer and the
machine. Plug the USB cable connector into the
corresponding USB ports for the computer and for the
machine. Copy the embroidery pattern file to the
removable disk that has been assigned to the
embroidery machine.
For detailed procedures, refer to the manual of PE-
DESIGN (version 11 or later) or Design Database
Transfer.
Memo
to return to the previous screen.
.
To save embroidery patterns to another memory,
touch , and then select the desired destination.
Touch to delete the embroidery pattern.
4
3