Lcd Screen - Brother 884-T23 Operation Manual

LCD SCREEN

Touch the LCD screen, or a key, with your finger or the
included touch pen to select a machine function.
CAUTION
• Only touch the screen with your finger or the
touch pen included with the machine. Do not
use a mechanical pencil, screwdriver or any
other hard or sharp object. In addition, do not
touch the screen with extreme pressure.
Otherwise the screen may be damaged.
• All or part of the screen may sometimes
become darker or lighter due to changes in the
surrounding temperature or other changes in
the environment. This is not a sign of a
malfunction. If the screen is difficult to read,
adjust its brightness.
■ Pattern type selection screen
2
3
4 5
Display
No.
Key Name
1
Cancel all operations
previously performed and
return to the initial pattern
Home key
type selection screen.
2
– This area displays the
selected pattern.
Pattern
display area
24
1
6 7 8
Function Page
–
109
Display
No.
Key Name
3
– Shows the available
embroidering area for the
Embroidering
attached embroidery frame.
area line
The embroidery frame
indications, the grid lines
and other display settings
can be specified from the
machine settings screen.
4
Change the machine
settings.
Settings key
5
Check a machine
operation.
Machine
operations
guide key
6
Move or thread a selected
needle bar, to position the
carriage, or to oil the
Needle bar/
machine so the embroidery
Frame move
frame can easily be
key
removed or attached.
7
Set the clock to your local
time.
Clock key
8
Specify the wireless LAN
settings. Also, this key
shows the machine's
Wireless LAN
wireless LAN signal
key
strength.
If there is a new update file,
the key appears as
* The keys in the table above appear and can be used
in most of the screens described later in this manual.
Function Page
109
25
29
67, 81
23
27, 158
.