Selecting/Managing Thread Colors For Each Needle Bar [Manual Color Sequence]; Convenience Of The Manual Color Sequence - Brother 884-T23 Operation Manual

■ To cancel the thread color settings for all
previously stitched design
Memo
• The color settings will be completely canceled even
if the machine is in the middle of the embroidery.
a Touch .
 The thread color setting is canceled.
b Touch .
 Thread colors are assigned by the machine again,
regardless of the previous spool setting.
Memo
• This function will not clear anchor settings of any of
the needles which have been assigned a thread
color. (page 107)
SELECTING/MANAGING THREAD
COLORS FOR EACH NEEDLE BAR
[Manual Color Sequence]
The thread colors assigned to each needle bar can be
manually specified/managed. In addition, the thread colors
can be assigned to needle bars automatically and more
efficiently than when the settings are normally specified.
Memo
• This function cannot be used when the machine is
in Link mode.

Convenience of the manual color sequence

The manual color sequence is convenient when the machine
is being used under the following conditions.
■ When using embroidery data that has no
thread color information, such as with DST
files
The thread spools to be used can easily be selected for
data with no thread color information. (For details, refer to
"SPECIFICATIONS" on page 156.)
■ When the same combination of thread colors
is always used
If specific thread colors are assigned to certain needle
bars, the thread color settings can be changed with the
needle bar number assignments, even when the pattern is
changed. The operation is simplified if the same thread
colors are always used.
■ When continuously embroidering with the
same needle bar settings
If the settings are specified normally, the needle bar
settings are canceled when the embroidering settings
screen appears after embroidering stops. However, with
[Manual Color Sequence], the needle bar settings
continue to be applied unless the pattern is deleted or the
machine is turned off.
This is useful if the same pattern is to be embroidered
continuously multiple times.
BASIC EMBROIDERY
59
2